Table of contents
Installation of lighting in the garden is quite simple. For this you will need:
- lamp,
- cement mortar,
- 3-core electric cable to be buried in the ground,
- plastic pot,
- PVC tube with a cross-section of 2 cm,
- wall plugs,
- bucket,
- drill.
Pour the mortar into a bucket and mix with water. Make a hole in the center of the pot. We put a tube through it, pour it with mortar, wait for it to thicken.Fasten pegs on both sides of the pot. When the mortar is dry, the cable - which is already in the ground in the garden - is put through a PVC pipe and attached to the lamp with electric cubes. Fasten the lamp to the mortar with screws.
In the garden, dig a hole and place the lamp base in it. We bury and cover with bark. Before work, disconnect the power from the system. Only when everything is ready and dry well, we can start it again.
Agnieszka Rembiszewska
