Surfaces withfinestone naturalare always up-to-date, regardless of the prevailing fashions and styles in landscape architecture. This natural raw material blends harmoniously into almost everyenvironmentandmatches bothtogardens ruralandmodern
Paths, squares ,terracesordrivewaysmade of pebbles are not only pretty, but also relatively cheap and easy to maintain. In generalclassification grainis divided intorounded(gravel) andirregular ( grits ,wedge ,rubble ).In the first case, we are dealing with smoothed pebbles ofmarine ,riverorlake origin ; in the second, with crushed aggregates, which are obtained mainly in quarries. Freak is perfect for littlefrequentedand decorative paths (also for rebate fillings, e.g. innauticalorMediterranean). The gravel layer should be 2 to 5 cm thick and the grain diameter should be 2 to 16 mm; the larger the stones, the thicker they must be piled.
Ondriveways ,alleysandplaceaggregate is the best. The pavement strength is primarily influenced by the quality of hardening, and indirectly by the quality of the so-called native substrate. On heavysoils claythe substrate should be slightly deeper and an additional 5 cm sand drainage. The load-bearing layer, i.e. the one on which we walk, should be spread in layers and each timecompacted with a compactor The thickness of the carrier layer for the garden path should be 10 to 20 cm.
The path should be sufficiently wide. So that they can walk on itwalk ,pass two people, its width should be between 120 and 150 cm.Layer load-bearingmust be profiled in such a way that it shows a 2% slope in the cross-section. Such a slight inclination is almost invisible, but thanks to it the rainwater flows out to the sides.
Along the entire routewe should placestops constituting a dam for bedding plants. And finally, note: paths are ingardennecessary, even necessary, but you should always try to minimize them and make the network of connectionsusedpossible most effective
