Table of contents
In our garden there is a place that is normally a rockery. An eyelet in it allows you to light the fire. You can rest on a stone bench. There are stones and sand scattered around. The special character of this place is given by the pergola through which the milinus is thrown. In summer, this lovable shrub is covered with gorgeous flowers. Here, the sausages taste special. Making such a corner is easy.
Hearth:
- We choose a square measuring 2x2.5 m. In its center we dig a round hole with a diameter of 50 cm. Line the sides with stones, and pour dense concrete inside, which we give the shape of a bowl.
Bench:
- Use a board and slats to nail the form onto a 6x30x90 cm reinforcement board. We put a reinforcing mesh in it and pour it with concrete.
- At a distance of 90 cm from the hearth, put two large stones next to each other. We grease them with adhesive mortar and put the plate on the seat.
Pergola:
- Behind the bench, at a distance of about 40 cm, we make a pergola from two pipes 5 cm in diameter, 230 cm long.
- At a distance of 30 cm from the top, we make a blind hole with a diameter of 1.2 cm in each of the pipes. Then connect the pipes with a rod 1 cm in diameter and 105 cm long.
- Insert the posts vertically into the previously prepared holes 30 cm deep. Pour with concrete.
- When the concrete has solidified, pour the next portion into the pipes and insert the 10-bolts vertically so that they protrude 6.5 cm.
- In boards with dimensions of 2.5x20x120 cm and 2.5x25x125 cm, drill holes for the screws mounted in the posts.
- After a few days, when the concrete is completely dry, attach the boards to the posts.
- Finally, paint the pergola with protective paint, and after it is dry, plant a climber. In our case, milin.
Skalniak:
- The designated area of the corner is fenced with large stones. We build a slope from the ground on them and plant rock plants.
- Sprinkle the rest of the surface with small stones.
 |
|
PERGOLA CONSTRUCTION SCHEME: 1 two pipes: diameter - 5 cm length - 230 cm 2 rod: diameter - 1 cm length - 105 cm 3 board dimensions: 2.5x25x125 cm 4 board dimensions: 2.5x20x120 cm 5 two tens screws 6 two holes: depth - 30 cm |
Elżbieta and Jan Babicz
